Enhance and protect your back yard

Sansin SDF provides tough, effective protection for wood siding. SDF’s specially formulated oils and resins penetrate into the wood, providing outstanding weather and UV protection in a wide range of natural, semi-transparent and even solid colors. Thanks to SDF’s unique water-borne technology, it can provide complete protection in just one coat – although a second coat will provide an even more beautiful and richer finish.

Between the BBQ, the patio furniture and family get-togethers, decks have to handle more traffic than any other wood around your house. That’s why Sansin Dec is designed as a rugged two-coat formula that penetrates deeply, protecting your wood from within. Where many deck coatings easily peel and scratch, exposing wood to the elements, Dec enhances wood tissue with lasting protection from rain and UV exposure. Perfect for cedar, exotic hardwoods, Southern pine, pressure-treated lumber – whatever your deck is made of, Sansin Dec’s deep penetrating solids will protect its beauty and character.

Sansin ENS is a durable two-coat finish that can be applied to virtually any surface – from millwork, to siding, to decks and even to improve the performance of other coatings. That’s because ENS is self-priming and offers exceptional adhesion to almost any surface, resulting in a satin or gloss finish of exceptional beauty.

ENS is highly resistant to wear, doesn’t discolor over time, and provides some of the toughest UV protection available. For even longer maintenance cycles, undercoat Sansin ENS with SDF or Classic.  Whatever your project, the exceptional characteristics of ENS – in either natural, semi-transparent or solid finishes – will raise it to a new standard of beauty and durability.

Sansin Wood Sealer is a low VOC water-borne protective wood treatment that aggressively repels water while allowing wood to breathe. Over a short time, the wood will weather uniformly to a beautiful silver grey tone. Wood Sealer provides exceptional protection and won’t break down with exposure to sunlight, retaining its water-repellency and protecting against weathering and wood rot. Because it erodes gently with time, maintenance is easy – just apply a fresh coat of Wood Sealer.

Even inorganic materials such as stone and masonry are susceptible to water absorption which (especially in colder climates) can cause extensive freeze/thaw damage. Sansin Aqua-Gard is a water-repellant coating engineered to protect new and existing above-ground concrete and masonry from weather damage. Aqua-Gard bonds with inorganic substrates to create a protective barrier that prevents water absorption and resists contaminants. Unlike paint, it won’t peel since it penetrates the substrate to protect from within.

Aqua-Gard is water-based, clear, odorless, and won’t discolor – it can even be tinted to act like a stain and match the color of your project. Because it repels water so aggressively, Aqua-Gard also works to protect reinforcing steel from corrosion. Sansin Aqua-Gard is suitable for brick walls and chimneys, stucco, roof tiles, concrete and masonry.

When it comes to restoring the natural color of even the most damaged and weather-beaten wood surfaces, Sansin Wood Wash will get the job done. Wood Wash is highly effective in removing unsightly weathering, mold, algæ, mildew, staining and extreme oil and grease – and it works fast. Simply spray your wood surface, allow to sit for up to 20 minutes, rinse off and let dry. Then apply the attached package of Sansin Wood Lightener – and watch as the beautiful natural color of your wood emerges as it dries.

Sansin Multi-Wash is a concentrated, biodegradable cleaner designed to be diluted to an appropriate strength for almost any job. Multi-Wash works to remove mildew, dirt, rust stains and more. Simply apply an appropriately diluted version of Multi-Wash to the surface and allow it to wet the contaminants for 5 minutes or more; follow by rinsing well with pressure washer or garden hose – and watch your surface come clean.

Sansin Wood-Strip is a superior stripper that easily removes oil and latex stain and paint coatings. Simply spray on the desired surface and Wood-Strip begins to penetrate and attack the coating immediately. It removes extreme weathering, water stains, mold and mildew, while restoring the natural color of wood. Sansin Wood-Strip is biodegradable, rinses off with water and works fast. Recommended for use on coated new and old wood surfaces such as decks, fences, siding, logs, board and batten, and timbers.

Sansin Wood Lightener is a concentrated, biodegradable cleaner and lightener for almost any bare wood surface. Wood Lightener works to help remove mold, iron and other stains and discolorations commonly found in wood while restoring the natural bright tone of bare wood – a critical step in making your transparent surface coatings look great.

The ultimate in Deck & Siding protection! An exterior 100% acrylic solid hide stain developed with the industry’s latest hybrid waterborne alkyd technology that provides superior adhesion, durability and resistance to cracking, peeling, and blistering. Formulated with fewer volatile solvents and additional mold & mildew inhibitors compared to conventional solid hide stains.

The ultimate in deep penetrating Translucent exterior wood protection that allows the natural beauty of the wood’s grain and texture to show through the stain.  An exterior Oil /Alkyd hybrid Translucent stain formulated with the use of Transparent Iron Oxide pigments and Mildewcides for maximum longevity and performance. Low molecular weight plant-based oils provides maximum penetration whereas the alkyd component contributes wear resistance,toughness and durability. Formulated with fewer volatile solvents and additional mould & mildew inhibitors compared to conventional semi-transparent stains.

Sharkskin adhesion promoting primer is a flexible Acrylic Elastomeric transparent primer/sealer designed to stabilize surfaces and increase the adhesion of film forming topcoats. A unique co-polymer design this product will penetrate and seal porous surfaces as well as lock down deteriorating surfaces in order to extend the service life and performance of the top coat. This product will adhere to “hard-to-stick” surfaces such as concrete, CMU, stucco and horizontal or vertical wood surfaces. For use as a primer for horizontal deck surfaces and may be top coated with a variety Cloverdale opaque finishes.

Seal ‘n Shine is a solvent based acrylic penetrating sealer for concrete, brick, exposed aggregate, tile, mortar and masonry block. This product will protect concrete and masonry surfaces from spilling, efflorescence, de-icing salts, oils, grease and freeze-thaw damage. The film is very clear, non-yellowing, abrasion resistant, non-lifting and is suitable for interior or exterior exposure.

AquaSeal Clear Acrylic Water Repellent is a premium quality allpurpose sealer for use on a variety of of masonry surfaces. AquaSeal forms a weather resistant, moisture barrier protecting concrete and masonry surfaces from damage caused by efflorescence, spalling, de-icing salts, freeze-thaw cycles and general degredation caused by water infiltration. Can be used for interior or exterior application.

Liquid Rubber Cool Foot Deck & Dock Coating is a brush, roll and spray high-performance, acrylic; elastomeric coating that reduces heat transfer by up to 35% compared to regular paint. The Cool Foot Deck & Dock Coating cures into a durable, seamless; colored waterproof membrane.

Contains no solvents, is non-toxic, VOC-free, and is non-flammable. The cured membrane has excellent solar reflectivity and UV stability.

Liquid Rubber Polyurethane Smooth Deck Coating forms a hard yet flexible, single-component, protective membrane that combines of specific polyurethane and acrylic polymers. This easy to apply, ultra-low VOC coating can be used to protect decks, docks, outdoor walkways, floors and much more. Given the cured membrane’s superior strength, waterproof properties and high adhesion to most substrates, Liquid Rubber’s Polyurethane Coating is an ideal solution for indoor and outdoor, and hot and cold environments.

Liquid Rubber Polyurethane Textured Deck Coating forms a hard yet flexible, single-component, protective membrane that combines of specific polyurethane and acrylic polymers. This easy to apply, ultra-low VOC coating can be used to protect decks, docks, outdoor walkways, floors and much more. Given the cured membrane’s superior strength, waterproof properties and high adhesion to most substrates, Liquid Rubber’s Polyurethane Coating is an ideal solution for indoor and outdoor, and hot and cold environments.

Liquid Rubber Multi-Purpose Primer is a high performance, engineered bonding aid formulated to improve the adhesion of Liquid Rubber membranes to a variety of substrates. Liquid Rubber Multi-Purpose Primer is a single component composition suitable for easy and safe application to numerous surfaces including concrete, wood, high-density polyethylene and EPDM, by means of brush, rollers or spray equipment.

Timbercare Exterior Hybrid Solid Stain with its alkyd fortified acrylic formula is a top quality self priming and sealer made of an alkyd and acrylic latex blend. This Hybrid blend offering the superior penetration and adhesion properties of an oil based primer and the long lasting durability of a 100% acrylic. Protects and beautifies exterior new wood, weathered wood or previously painted or stained wood surfaces. Recommended for wood siding, fences, trim, decks and outside furniture.

Timbercare Exterior Hybrid Semi-transparent Stain with its alkyd fortified acrylic formula is a top quality products made of an alkyd and acrylic latex blend. This Hybrid blend offering the superior penetration and adhesion properties of an oil and the long lasting durability of a 100% acrylic. Protects and beautifies exterior new wood, weathered wood or stained wood surfaces. Recommended for wood siding, fences, trim, decks and outside furniture.

Timbercare Exterior Hybrid Translucent Coating with its alkyd fortified acrylic formula is a top quality products made of an alkyd and acrylic latex blend. This Hybrid blend offering the superior penetration and adhesion properties of an oil and the long lasting durability of a 100% acrylic. Contains UV filter technology and built in water repellency for maximum wood protection against weather exposure, cracking, blistering, peeling. Protects and beautifies exterior new wood, weathered wood or stained wood surfaces and to help prevent surface mildew. Recommended for wood siding, fences, trim, decks and outside furniture.