From girder to drywall we have products for all your industrial coating needs.

For use as an easily maintained cosmetic finish coat on areas above the waterline. For use at Newbuilding, Maintenance & Repair or On Board Maintenance.

Used as a high gloss enamel finish for interior and exterior applications.  Suitable for mild industrial and commercial environments. Particularly suited for fabrication facility application.

A quick drying, one pack primer. Interprime 198 is surface tolerant, compatible with most substrates and can be overcoated with a wide range of finishes.

A two component, low VOC, high solids, fast curing epoxy primer/finish containing zinc phosphate anti-corrosive pigmentation.  Suitable for use as a one or two coat primer/finish coating or as an intermediate over recommended anti-corrosive primers. Intergard 345 provides a combination of anti-corrosive barrier protection, chemical fume and spillage resistance, along with good abrasion resistance. Ideal for use in moderately corrosive environments and where fast drying/rapid recoating is desired.

A two pack, acrylic polyurethane finish giving excellent durability and long term recoatability.  As a cosmetic finish on above water areas. Suitable for use on topsides, external superstructure, external decks and boottops.  For use at Newbuilding, Maintenance & Repair or On Board Maintenance.

A two component, low VOC, high solids, modified epoxy barrier coat designed to give long term protection in a single coat application. Will continue to cure when immersed in water and has excellent cathodic disbondment resistance.

A light coloured, abrasion resistant, aluminium pure epoxy coating giving excellent long term anticorrosive protection and low temperature application capability.

A two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20. As a high performance primer to give maximum protection as part of any anti-corrosive coating system for aggressive environments including those found on offshore structures, petrochemical facilities, pulp and paper plants, bridges and power plants. Interzinc 52 has been designed to provide excellent corrosion resistance in both maintenance and new construction situations.

A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating. For application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings. Provides excellent anti-corrosive protection in industrial, coastal structures, pulp and paper plants, bridges and offshore environments in both atmospheric exposure and immersion service. NSF Certification is for tanks greater than 100 gallons (378.5 litres).

A high performance, multi-purpose, surface tolerant, two-component chemically-cured epoxy semi-gloss coating.  For use on properly prepared steel or masonry surfaces including immersion (non-potable water) service. Ideal for structural steel, piping, storage tank exteriors, machinery, and equipment in petroleum refineries, pulp and paper mills, chemical and fertilizer plants, and sewage treatment plants. Performance alternate for Federal Specifications TT-C-550 and TT-C-545. Meets AWWA D102

A high performance, two component, chemically cured, aliphatic urethane semi-gloss (378) or gloss (379) finish.  For use on properly prepared and primed steel, concrete or steel floors, masonry, drywall, plaster, metal, concrete block, galvanized, aluminum, poured concrete and glazed brick. Ideal for use on exterior or interior structural steel, piping, metal buildings, control cabinetry, conveyors, pumps, storage tank exteriors, motors, machinery, and transportation vehicles. Can also be used in the hard service areas of food processing plants, dairies, schools, restaurants, hospitals, correctional facilities, factories, stadiums, arenas, and amusement parks.

A high performance, chemically cured, rust inhibitive epoxy primer for interior or exterior steel, galvanized metal or aluminum surfaces.

A high performance, multi-purpose, surface tolerant, two-component chemically-cured epoxy semi-gloss coating for industrial or high performance architectural coating (HIPAC) applications. For use on properly prepared steel or masonry surfaces.

A cost effective, pH neutral paint remover for the removal of old paint and coatings systems from steel, concrete, aluminum and other alloys, wood and masonry substrates.

Devprep 88 is ideal for cleaning intact painted surfaces in preparation for repainting. It is also useful in cleaning rusted steel, galvanized  metal, and masonry surfaces. It is particularly useful for cleaning dirty, greasy concrete floors, walls, machinery, and equipment in industrial and commercial environments. Devprep 88 can also be used to clean aluminium, galvanized and other surfaces prior to painting. Also effective, prior to abrasive blasting or application of wetting primers, to remove grease, oil, chlorides or other contaminants.

For use as a durable high performance architectural coating (HIPAC) on interior poured concrete, concrete block, concrete floors, drywall, metal and wood. Features easy application, very low VOC, high flash point, lower odour than solvent-based epoxies, and a tough, stain-resistant finish. Ideal for hard usage areas of schools, hospitals, restaurants, public buildings and factories. Suitable for use in USDA-inspected facilities.